| Number: | 202209131008461505 |
|---|---|
| Model: | FW568S |
| Size: | 6" |
| Introduction: |
Screen Size： 6" IPS
Resolution： 1920x1080 pixels Aspect ratio： 16:9 Brightness： 450cd/m² |
| Input: | 1*HDMI, 1*SDI, Type-C, DC IN 12V |
| Output: | 1*HDMI, 1*SDI, DC OUT 8V, Stereo Headphone |
| DM: | |
| Download: | |
FEELWORLD FW568S is a 6-inch full HD field monitor, equipped with 3G-SDI, 4K HDMI input and output interfaces, and provides a series monitoring and framing tools with new menu layout, various numerical parameters are clear at a glance, easy to setting. There is a F970 external install and power kit on the rear of FW568S, which can install such as wireless transmission, LED light, etc. It combines the monitor with wireless transmission to get rid of unnecessary cables. And the FW568S compact and lightweight especially suitable for use with gimbal, to meet the photographers and 1st AC to move on set .
Viewing clearly and capture every detail with confidence
FW568S comes with full HD 1920x1080 resolution, provides excellent details, so you can enjoy sharper and richer colors image.
The small size monitor is suitable for using with gimbal, and the weight of FW568S only 203g, it is perfect for those who need an easy-to-use lightweight on-camera monitor such as gimbal operators, or shooters that are always on the go.
The FW568S adopts wheel button operation, via a key , you can complete all of setting . New UI menu, take the software functions are iconized, and the values at a glance. It is more convenient and quickly to operate the function.
Simplify your photography equipment
A Sony F970 external install and power kit design is added to the back of the monitor. The external kit can be used to install and install the external equipment, like wireless transmission, LED light, video converter and others that can be powered by a Sony F970 battery. Greatly saving the space occupied by the equipment and reducing the weight of photography equipment.
The kit has two cross slots, you can adjust the position of the external device by loosening the screws. When you don't need the kit, you can directly loosen the screws to remove the kit.
The monitor equipped with SDI and 4K HDMI input and output, compatible with film camera, DSLR camera, mirrorless camera, realize simultaneous monitoring by directors, photographers and 1st AC, support up to 4K@30Hz, the screen is smooth and clear. And provides 3.5mm headphone jack to monitor audio.
Power your DSLR or mirrorless camera
Provides auxiliary power out (DC OUT 8V) allowing shooters to power their cameras. With a battery adapter cable (Optional), the FW568S extends camera run-time, while providing a more usable display.
Barrel output for powering your camera with a separately available DC coupler via adapter (NP-FW50 Sony & LP-E6 Canon & DMW-BLF19 Panasonic). More adapters coming soon.
Note: since different brands and models of cameras require different power for normal operation, the camera may not be able to take pictures or video normally. Therefore, when using batteries to power the monitor, in order to use the camera normally, it is recommended to use a large-capacity fully charged battery.
In addition to the DC 12V power input (can be using 12V/1.5A adapter), FW568S also has a F970 battery plate, and supports 5V Type-C input which can be powered by mobile phone chargers or power banks (at least 5V/2A) .
● Compatible Battery: Sony F970, F960, F950,F930, F770, F750, F730, F570, F550, F530 series. (Note: the battery not including, please purchase separately)
The monitor includes a plethora of useful features such as histogram, false color, focus assist, embedded audio, pixel to pixel, frame guides, nine grid etc. As well as a flexible 3D LUT implementation (use built-in LOG to Rec.709 video or upload .cube files).
Supports to load 32 custom LUTs
The LUT loading function makes the color calibration easier and more intuitive, optimizes the workflow and improves the work efficiency in the early stage of shooting. You could use built-in LOG or upload .cube files. FW568S allows you to load internally up to custom LUTs (Up to 32 user files can be imported), looks or profiles at any time via the TYPE-C to USB connector . Slot and instantly select between them, maintaining creative intent, always.
Save your budget
When you need to analyze image quality more accurately than simply looking at the picture then use FW568S's built in waveform monitoring! Choose from waveform (RGB Parade, YUV Parade, Y Parade), vector, histogram, audio phase and level displays, and get broadcast accurate waveform monitoring that shows everything you need to know technically about your video and audio signals. The functions can be opened separately, and also support one key to open all scope mode. FW568S becomes the ideal choice for live production monitoring, so you no longer need to use a separate expensive scopes!
Every FW568S monitor will ship with a cold shoe mounted Tilt Arm. Shooters will have a secure way to position their monitor while maintaining a low profile.
•The monitor can be rotated 360 degree with two different ways, for viewing convenience. (1.The monitor can be rotated 360 degree from up to down through the side mounting point of tilt arm; 2. The monitor can be rotated 360 degree from left to right through the bottom mounting point of tilt arm).
• Secure and lightweight mounting via shoe mount or 1/4"-20 thread
• Includes a shoe mount of its own for accessories like a microphone, LED light, or wireless receiver, etc.
• There are two small dots on the tilt arm, which are aligned with the monitor for installation, the connection is more stable, just grab the monitor to rotate without loosening the screws.
Meet your diverse need of monitoring
The monitor is equipped with 3 standard 1/4”mounting threads (top, bottom, right side), you can easily mount it on the camera or other types of equipment with a magic arm, bracket, etc.. Whether it is horizontal or vertical shooting, you can accurately monitor.
The FW568S attached a sunshade, which allows the photographer to focus more on the video and avoid the interference of strong light, providing a better visual experience. Moreover, the FW568Smonitor and the sunshade fixing frame are integrated, so you can directly attach the sun visor to the monitor through the attached velcro. The installation process is simple and fast, which is very suitable for outdoor shooting.
* 6-inch 1920x1080full HD IPS screen
* New UI interface, easier to setup
* Scroll Wheel button operation, a button can complete all the operations
* Supports 3D LUT Log to REC.709 and user 3D LUT upload (up to 32)
* With Waveform, Vectorscope, RGB Histogram, Focus Assist, Monochrome etc. functions, help you accurately exposure and focus every shot.
* Multiple power supply modes: DC IN 12V, Type-C 5V and NP-F battery slot, meet the different selection.
* Stereo Earphone output
* Sony F970 external install and power kit design can be used to install and supply power to external equipment, easy to install and disassemble, simplify your photography equipment
* DC 8V power out to power your DSLR camera or mirrorless camera
Brightness Histogram
The Brightness Histogram is a quantitative tool to check the picture brightness.The feature shows the distribution of brightness in an image as graph of brightness along the horizontal axis (Left:Dark, Right:Bright)and a stack of the number of pixels at each level of brightness along the vertical axis.
Embedded Audio Monitoring
The Audio Level Meters provide numerical indicators and headroom levels. It can generate accurate audio level displays to prevent errors during monitoring. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB.
Peaking Focus Assist
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. You can switch the putline color between red, green, blue according to different tone of the subject.
False Color
The False Color filter is used to aid in the setting of camera exposure. As the camera Iris is adjusted, elements of the image will change color based on the luminance or brightness values. This enables proper exposure to be achieved without the use of costly, complicated external test equipment.
Exposure (zebras)
The Exposure is used to assist in exposure adjustment in the mode of Zebra Pattern. It is considered overexposed and displays the moving warning lines onto the over exposed areas. 1-100IRE adjustable.
Check Field
Check Field is an assistant function to adjust camera color settings. Under the check field mode, you can use red, green, blue or mono pixels to generate the image, because hue and saturation can be adjusted more quickly and accurately in this environment.
Zoom In (4X, 9X, 16X)
Image magnification is HD signal in any part, an amplification for high quality close-up.
.jpg)
Anamorphic Mode (1.33x, 1.6, 2.0x, 2.0x mag, User)
You can choose 1.33x, 1.6x, 2.0x, 2.0x mag, User-defined adjustment: 1.20x~2.00x. Built-in selection of no squeeze, 1.3× or 2.0× allows you to use anamorphic lenses or adapters and see the image unsqueezed, even if your camera does not de-squeeze in camera. A 2.0× mag mode, magnifies the center of your image so you can check the focus of your scaled image.
Image Flip
The Horizontal,Vertical and Hor&Ver of the image around flip.
Nine Grid
Zoom one of the images to realize the full screen. You can switch the Mark color between Red, Green, Blue, White, Black according to different tone of the subject.
Pixel to Pixel
Enable the filmmaker to check the image from the 1:1 signal source without scaling.This feature is essential for capturing optimum detail.
Center Marker & Safe Marker
Safe Mark for View Finding and Composition (80%, 85%, 90%, 93%, 96%, 2.35:1). You can switch the Mark color between Red, Green, Blue, White and Black according to different tone of the subject.
Ratio Marker
(4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1). Frame blanking zone includes 6 Levels, from 0-6 (Transparent to Black). You can switch the Mark color between red, green, blue, white and black according to different tone of the subject.
| Model | FW568S |
| Screen Size | 6" IPS |
| Resolution | 1920x1080 pixels |
| Pixel Pitch | 0.069 (H) × 0.069 (V) (mm) |
| Aspect Ratio | 16:9 |
| Brightness | 450cd/m² |
| Contrast Ratio | 1000:1 |
| Backlight | LED |
| Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
| 1 X HDMI | HDMI |
| 1 X SDI | 3G-SDI |
| 1 X Type-C | 5V Type-C (Note: please use 5V/2A or more than 2A Type-C power supply) |
| 1 X HDMI | HDMI |
| 1 X SDI | 3G-SDI |
| 1 X DC | Barrel (5.5mm outer, 2.1mm inner) barrel output for powering cameras via camera specific adaptor. |
| Audio | 3.5mm Stereo Headphone |
| 720p(60/59.94/50/30/29/25/24/23.98) |
| 1080i(60/59.94/50) |
| 1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/23.98sF) |
| 480i/576i/480p/576p |
| 1080i (60/59.94/50) |
| 720p (60/59.94/50/30/29.97/25/24/23.98) |
| 1080p (60/59.94/50/30/29.97/25/24/23.98) |
| 3840x2160p(30/29.97/25/24/23.98 Hz) |
| 4096×2160p(24Hz) |
| Input Voltage | DC7～24V |
| Power Consumption | ≤9W |
| Working Temperature | -20°C~50°C |
| Storage Temperature | -30°C~60°C |
| Install Way | 1/4"-20 Thread Socket ( Right, Top, Bottom) |
| Unit Size | 151Lx92Hx31.4D(mm) |
| Unit Weight | 203g |
| Color Box Size | 186L*124W*80H(mm) |
| Outer Carton Qty | 10 |
| Outer Carton Size | 465*200*326 (mm) |
| Gross Weight | kgs |
| * Support 3D LUT Log to Rec.709, user 3D LUT Upload |
| * Parade (RGB, YUV, Y) |
| * All Waves |
| * Vector |
| * RGB Histogram |
| * Brightness Histogram |
| * Embedded Audio |
| * Peaking Focus (red, green, blue,three peaking colors optional; 1~10 peaking level adjustable) |
| * False Colors |
| * Zebra Exposure (1%~100% adjustable) |
| * Check Field (Red, Green, Blue, Mono) |
| * Scan Mode (Under Scan, Over Scan) |
| * Anamorphic Mode (1.33X、1.6X、2.0X、2.0X MAG) |
| * Image Flip (H, V, H/V) |
| * Image Freeze |
| * Center Marker |
| * Safety Marker (80%, 85%, 90%, 93%, 96%, 2.35:1) |
| * Ratio Marker (4:3、13:9、14:9、15:9、16:9、1.85:1、2.35:1) |
| * Marker Color (red, green, blue, white, black, yellow) |
| * Color Temperature Adjustment (5600K, 6500K, 9300K, user) |
| * Nine Grid |
| * Zoom (100%~200%) |
| * Aspect Ratio |
| * Pixel to Pixel |
1× Monitor
1× Mirco HDMI Cable
1× Tilt Arm
1× Sunshade
1× Type-C to USB
1× Manual
