Language：中文 | English | German
Current Position： English> Products> SDI Camera Field Monitor

7" IPS 1280x800 Camera-Top 3G-SDI Field Monitor with Tally, Peaking,Histogram FW-1D/S/O

Hits： 次

Model：FW-1D/S/O

Introduction

Screen Size：  7" IPS
Resolution：   1280x800 pixels
Aspect ratio： 16:9
Brightness：   400cd/m²

Input

3G-SDI, HDMI, Ypbpr, Video, Auido (L/R)

Output

3G-SDI, HDMI, Ypbpr, Video, Stereo Headphone, Speaker(built-in)

Download

pdf

  • OVERVIEW

  • FEATURES

  • SPECIFICATIONS

  • VIDEO

  • APPLICATION

  • ACCESSORIES

 
This high resolution 7 inch monitor FW-1D/S/O uses IPS technology to provide the best possible picture,with more accurate colour rendering and a wider range of viewing angles. The resolution of the screen is 1280 x 800 pixels, and it has a high brightness of 400cd/m ² and high contrast ratio of 800:1. It’s features a large array of software functions to help with focus and exposure.
 
The monitor accepts a variety of input sources, HDMI, SDI-HD / SDI-3G, component or composite, which can be selected by using the toggle buttons on the front of the unit. Monitoring of audio can be done using either the on-board speaker or via the front headphone jack. In bright light conditions, the included folding sun hood can be quickly clipped on to block out unwanted glare and reflections from the sun.
Wider Viewing Angle
Enjoy Consistent Images from Any Perspective FW-1D/S/O uses an IPS panel, which provides a wide 178°/178° viewing angle and brightness output of up to 400nit. This means you'll be able to see accurate, consistent and bright images from any point of view.

  • Wide color gamut LCD panel and 1280×800 resolution ensure the monitor more precise color restoration exquisite picture quality and more rich color.
  • Speaker and Stereo Headphone Output
    In addition to broadcasting picture, the V-Screen is also equipped with an audio system so you can simultaneously monitor your audio input while watching your picture.
  • Multiple Inputs and Outputs
    Multiple input formats to meet all HD, SD, analogue video signal input and display demand Professional functions set. The monitor comes with 3G HD-SDI, HDMI, Composite, and Component Input and Ouput. FW-1D/S/O has both HDMI SDI in and out, allowing it to not only display live signals, but also send them out to other monitors simultaneously. It's the ability to display live picture on multiple displays at once while still maintaining the original video quality.
 
  • Screen Hood
    New extended screen hood, acquire ideal visual effect under almost all environments.

 

1. Wide view angle IPS Screen, High resolution 1280x800, bright, colorful display
2. 3G-SDI, HDMI, Ypbpr, Video, Audio(L/R) and 3G-SDI, HDMI, Ypbpr, Video loop-through output
3. Special Features:
* Peaking Focus Assist (1. Red highlight over parts of the image in focus; 2. Red highlight over parts of the monochrome image in focus)
* Brightness Histogram
* False Colors
* Exposure (zebras)
* Check Field (Red, Green, Blue, Mono)
* Camera Mode
* Pixel to Pixel
* Center Marker
* Safe Marker (80%, 85%, 90%, 93%, 96%, 2.35:1)
* Image Flip (Horizontal, Vertical, Hor&Ver)
* Image Freeze
* Zoom All
* U/D & L/R Zoom
* Custom Color Temperature
4. Monitoring via front panel 3.5mm stereo headphone jack and built-in speaker
5. Built-in LED tally indicators
6. Power using included 12-volt supply or use standard 4-pin XLR
Peaking Focus Assist
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. It's shows Red highlight over parts of the monochrome image in focus.
Brightness Histogram
The Brightness Histogram is a quantitative tool to check the picture brightness.The feature shows the distribution of brightness in an image as graph of brightness along the horizontal axis (Left:Dark, Right:Bright) and a stack of the number of pixels at each level of brightness along the vertical axis.
False Colors
The False Color filter is used to aid in the setting of camera exposure. As the camera Iris is adjusted, elements of the image will change color based on the luminance or brightness values. This enables proper exposure to be achieved without the use of costly, complicated external test equipment.
Exposure (zebras)
The Exposure is used to assist in exposure adjustment in the mode of Zebra Pattern, it is considered overexposed and displays the moving warning lines onto the over exposed areas.
Check Field
Check Field is an assistant function to adjust camera color settings. Under the check field mode, you can use red, green, blue or mono pixels to generate the image, because hue and saturation can be adjusted more quickly and accurately in this environment.
Camera Mode Function
It will be full screen under camera mode.
Pixel to Pixel
Enable the filmmaker to check the image from the 1:1 signal source without scaling. This feature is essential for capturing optimum detail.
Center Marker & Safe Marker
Safe Mark for View Finding and Composition (80%, 85%, 90%, 93%, 96%,2.35:1)
Image Flip
The Horizontal, Vertical and Hor&Ver of the image around flip.

 

 

 

Display Spec.
 Model  FW-1D/S/O (FW-1D/O: W/O SDI)
 Screen Size  7" IPS
 Resolution  1280×800 pixels
 Dot pitch  0.117(H)×0.117(V) mm
 Aspect Ratio  16:9
 Brightness  400cd/m²
 Contrast Ratio  800:1
 Backlight  LED
 Viewing Angle  89°/89°(L/R) 89°/89°(U/D)
 
Input
 1 X BNC  3G-SDI
 1 X HDMI  HDMI 
 1 X BNC  Y
 1 X BNC  Pb
 1 X BNC  Pr
 1 X BNC  Video
 2 X RCA  Audio(L/R)
 1 X DB-9  Tally
 
Output
 1 X BNC   3G-SDI
 1 X HDMI  HDMI
 1 X BNC  Y
 1 X BNC  Pb
 1 X BNC  Pr
 1 X BNC  Video
 
Audio
 Audio Out  Stereo Headphone, Speaker
 
SDI Support Format
480i/576i
720p(60/59.94/50/30/29/25/24/23.98)
1080i(60/59.94/50)
1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF)
 
HDMI Support Format
480i/576i/480p/576p
1080i (60/59.94/50)
720p (60/59.94/50/30/29/25/24/23.98)
1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF)
 
General
 Input Voltage  DC6～18V
 Power Consumption  ≤12W
 Power Connector  DC/ 4-pin XLR
 Battery Plate  F970 (Standard); D28S, LP-E6, V-Mount, Anton Bauer (Optional)
 Working Temperature  -10°C~55°C
 Storage Temperature  -20°C~65°C
 Install Way  1/4"-20 Thread Socket (All 4 Sides)
 Unit Size  210L×160L×41.6D (mm)
 Unit Weight  780g
 
Advanced Features
* Peaking Focus Assist (1.Red highlight over parts of the image in focus, 2.Red highlight over parts of the monochrome image in focus)
* Brightness Histogram
* False Colors 
* Exposure(Zebra)
* Check Field (Red,Green,Blue,Mono)
* Camera Mode
* Pixel to Pixel
* Center Marker 
* Screen Marker (80%,85%,90%,93%,96%,2.35:1)
* Image Flip (H, V, H/V) 
* Image Freeze 
* Zoom All
* U/D & L/R Zoom
* Custom Color Temperature
* Built-in LED tally indicators 

 

Standard Accessories:
1× Mini HDMI Cable
1× Sunshade
1× Hot Shoe Mount
1× F970 Battey Plate
1× Tally Kit
1× Operation Manual