Language:中文 | English | German
Current PositionEnglish> Products> SDI Camera Field Monitor

10.1" IPS 1280x800 3G-SDI HDMI Camera-Top Monitor with Peaking Focus FW1018S

Hits:

Model:FW1018S

Introduction

Screen Size:  10.1" IPS
Resolution:   1280x800 pixels
Aspect ratio: 16:10
Brightness:   650cd/m²

Input

3G-SDI, HDMI, Ypbpr, Video, Audio(L/R)

Output

3G-SDI, HDMI, Ypbpr, Video, Stereo Headphone, Speaker(bulit-in)

Download

pdf

  • OVERVIEW

  • FEATURES

  • SPECIFICATIONS

  • VIDEO

  • APPLICATION

  • ACCESSORIES

 
The FEELWORLD FW1018S 10.1”IPS HD LCD On-Camera monitor is one of the best monitors of its kind. Thanks to FEELWORLD's good price-quality ratio, many professional photographers and videographers choose for FEELWORLD. The monitor also features image measurement functions like Focus Assist, Center Marker, Safe Frame, Check Field, Camera Mode, Aspect Ratio, Image Flip, Pixel-to-Pixel and Image Freeze you will be able to analyze the image. These functions are assignable across six function buttons on the front panel.
 
The large size 10.1 inch enables you to focus clearly on your shots and eliminate the guesswork from framing. It blows up your tiny built-in camera screen to a much larger display that enables easier viewing and won't strain your eyes. With brightness levels of 650cd/m², a 800:1 contrast ratio and 178° vertical and horizontal viewing angles this monitor is a useful tool when shooting video or stills, providing you with a larger image than your camera's built-in viewfinder or LCD screen. FW1018S provides maximum versatility with multiple inputs: HDMI, 3G-SDI, Ypbpr, Video, Audio(L/R) and HDMI, 3G-SDI, Ypbpr, Video loop-through output, you can connect it directly to any DSLR or HD video.
  • 1280X800 IPS HD Panel
    Enjoy Consistent Images from Any Perspective. FW1018S uses an IPS panel, which provides a wide 178°/178° viewing angle and brightness output, up to 650cd/m². This means you’ll be able to see accurate, consistent and bright images from any viewing point.
  • Multiple Inputs and Outputs
    SDI / HDMI / YPbPr / Video / Audio
    Input:
    3G-SDI X 1
    HDMI X 1
    Y X 1
    Pb X 1
    Pr X 1
    Video X 1
    Auido (L/R) X 2
    Output:
    3G-SDI X 1
    HDMI X 1
    Y X 1
    Pb X 1
    Pr X 1
    Video X 1
    Audio:
    Stereo Headphone
    Internal Speaker
  • Professional Peaking Focus Assist
    The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. It's shows Red highlight over parts of the monochrome image in focus.
  • 3-color Tally Light
    DB-9 input signal
    There is front TALLY lights with 3 colors display, and controlled via DB-9 ports on the rear panel.
  • Flexible Battery Systerm
    The monitor is powered from 4-pin XLR connector, or 12V DC input with the included power adapter, and FW1018S has flexible battery systerm that supports F970, LP-E6, D28S, Anton, Sony V mount plates of your choice.

 

1. Wide view angle IPS Screen, High resolution 1280x800, bright, colorful display
2. 3G-SDI, HDMI, Ypbpr, Video, Audio(L/R) inputs and 3G-SDI, HDMI, Ypbpr, Video loop-through outputs
3. Special Features:
* Peaking Focus Assist (Red highlight over parts of the monochrome image in focus)
* Check Field (Red, Green, Blue, Mono)
* Camera Mode
* Pixel to Pixel
* Center Marker
* Safe Marker (80%, 85%, 90%, 93%, 96%, 2.35:1)
* Image Flip (Horizontal, Vertical, Hor&Ver)
* Image Freeze
* Zoom All
* U/D & L/R Zoom
* Custom Color Temperature

4. Monitoring via front panel 3.5mm stereo headphone jack and built-in speaker
5. Built-in LED tally indicators (Red, Green, Yellow)
6. Power using included 12-volt supply or use standard 4-pin XLR
Peaking Focus Assist
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. It's shows Red highlight over parts of the monochrome image in focus.
Check Field
Check Field is an assistant function to adjust camera color settings. Under the check field mode, you can use red, green, blue or mono pixels to generate the image, because hue and saturation can be adjusted more quickly and accurately in this environment.
Camera Mode Function
It will be full screen under camera mode.
Pixel to Pixel
Enable the filmmaker to check the image from the 1:1 signal source without scaling. This feature is essential for capturing optimum detail.
Center Marker & Safe Marker
Safe Mark for View Finding and Composition (80%, 85%, 90%, 93%, 96%,2.35:1)
Image Flip
The Horizontal, Vertical and Hor&Ver of the image around flip.

 

Display Spec.
 Model  FW1018S (FW1018: W/O SDI)
 Screen Size  10.1" IPS
 Resolution  1280×800 pixels
 Dot pitch  0.1695(H)x0.1695(V) mm
 Aspect Ratio  16:10
 Brightness  650cd/m²
 Contrast Ratio  800:1
 Backlight  LED
 Viewing Angle  89°/89°(L/R) 89°/89°(U/D)
 
Input
 1 X BNC  3G-SDI
 1 X HDMI  HDMI 
 1 X BNC  Y
 1 X BNC  Pb
 1 X BNC  Pr
 1 X BNC  Video
 2 X RCA  Audio(L/R)
 1 X DB-9  Tally
 
Output
 1 X BNC   3G-SDI
 1 X HDMI  HDMI
 1 X BNC  Y
 1 X BNC  Pb
 1 X BNC  Pr
 1 X BNC  Video
 
Audio
 Audio Out  Stereo Headphone, Speaker
 
SDI Support Format
480i/576i
720p(60/59.94/50/30/29/25/24/23.98)
1080i(60/59.94/50)
1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF)
 
HDMI Support Format
480i/576i/480p/576p
1080i (60/59.94/50)
720p (60/59.94/50/30/29/25/24/23.98)
1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF)
 
General
 Input Voltage  DC6~36V
 Power Consumption  ≤12W
 Power Connector  DC/ 4-pin XLR
 Battery Plate  F970 (Standard); D28S, LP-E6, V-Mount, Anton Bauer (Optional)
 Working Temperature  -20°C~55°C
 Storage Temperature  -30°C~65°C
 Install Way  1/4"-20 Thread Socket (3 sides left&right&bottom)
 Unit Size  258L×192H×39D mm 
 Unit Weight  810g
 
Advanced Features
* Peaking Focus Assist(Red highlight over parts of the monochrome image in focus)
* Check Field (Red,Green,Blue,Mono)
* Camera Mode
* Pixel to Pixel
* Center Marker 
* Screen Marker (80%,85%,90%,93%,96%,2.35:1)
* Image Flip (H, V, H/V) 
* Image Freeze 
* Zoom All
* U/D & L/R Zoom
* Custom Color Temperature
* Built-in LED tally indicators (Red, Green, Yellow)

 

Standard Accessories:
1× Mini HDMI Cable
1× Sunshade
1× Hot Shoe Mount
F970 Battey Plate
1× Tally Kit
1× U bracket
1× Operation Manual