Language:中文 | English | German
Current PositionEnglish> Products> SDI Camera Field Monitor

7" Aluminum Design IPS 1280x800 Camera-Top Monitor with Waveform,Scopes and HDMI converted to SDI output Z7

Hits:

Model:Z7

Introduction

Screen Size:  7" IPS
Resolution:   1280x800 pixels
Aspect ratio: 16:10
Brightness:   400cd/m²

Input

3G-SDI, HDMI, Video, Audio(L/R)

Output

3G-SDI, HDMI, Video, Stereo Headphone, Speaker(built-in)

Download

pdf

  • OVERVIEW

  • FEATURES

  • SPECIFICATIONS

  • VIDEO

  • APPLICATION

  • ACCESSORIES

 
The FEELWORLD 7" Pro IPS LCD Monitor with Scopes is a compact battery powered field monitor with a 16:10 native aspect ratio, and a wide variety of signal scopes that allows you to customize your display to suit changing needs depending on the job. It features a mode that tiles histogram, audio bar, vector, RGB histogram, and YUV waveform in a border surrounding your video image, allowing you an unobstructed view of your video and scopes at the same time. The IPS panel features a native 1280 x 800 resolution that scales to fit HD and SD images, in NTSC and PAL, over SDI and HDMI connections. Z7 Build-in HDMI to SDI Conversion, is used to broadcast and deliver the HDMI camera video. The monitor features two separate anamorphic modes, a 1.33 and a 2.0x squeeze, allowing you to view your footage unsqueezed, even if your camera doesn't unsqueeze the output.
 
The monitor provides a 178° viewing angle without noticeable color or contrast shift. You use the front mounted knobs to select which scopes you wish to display, as well as choose from a variety of safe area markers as well as peaking and zebras. You can select to display audio level meters on the side of the monitor if you wish, or monitor the audio from the built-in speaker or headphone jack. The monitor is powered from 4-pin XLR connector, or 12V DC coax input with the included power adapter, and Z7 has flexible battery systerm that supports F970, LP-E6, D28S, Anton, Sony V mount plates of your choice.
  • 1280X800 IPS HD Panel
    With the Z7's 7-inch 1280 X 800 IPS HD panel what you see is truly what you get! The IPS HD Panel delivers near perfect viewing angles outputting crisp, clear shots on the field, which means less time in the editing room. The Z7's IPS HD Panel is the tool of choice for high quality color reproduction.
  • Multiple Inputs and Outputs
    Input:
    3G-SDI X 1
    HDMI X 1
    Video X 1
    Auido (L/R) X 2
    Output:
    3G-SDI X 1
    HDMI X 1
    HDMI input converted to SDI output X 1
    Video X 1
    Audio:
    Stereo Headphone
    Internal Speaker
  • Build-in HDMI to SDI Conversion
    The build-in conversion is used to broadcast and deliver the HDMI camera video. It’s same format conversion and supports the following HDMI formats: 480i, 576i, 720p (60 / 59.94 / 50), 1080i (60 / 59.94 / 50), 1080p (30 / 29.97 / 25 / 24 / 23.98)
Video Analysis Assistant Pattern
Waveform / Vector scope / Histogram
Z7 supports Waveforms display under both SDI and HDMI, including RGB,YUV,Y channels.The Vector scope and R/G/B histogram can be switched on/off independently to the waveforms,and support All scope Mode.
  • Embedded Audio Monitoring
    The Audio Level Meters provide numerical indicators and headroom levels. It can generate accurate audio level displays to prevent errors during monitoring. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB.
  • 3-color Tally Light
    DB-9 input signal
    There is front and rear TALLY lights for with 3 colors display (Red,Green,Yellow), and controlled via DB-9 ports on the rear panel.
Flexible Battery System
The Z7 has a flexible battery system that supports F970, D28S, E6, V-Mount and Anton Bauer battery plate of your choice.

 

1. 1280×800, 800:1 contrast, IPS wide view angle H/V 178°
2. 3G/HD/SD-SDI, HDMI, Video input
3. Build-in HDMI to SDI Conversion output
4. Monitoring via front panel 3.5mm stereo headphone jacks, built-in speaker
5. Built-in LED tally indicators (Red, Green, Yellow)
6. Power using included 12-volt supply or use standard 4-pin XLR
7. Special Features:
*Waveform (RGB, YUV, Y (Luminance)
*Vector Scope
*Color Histogram
*Histogram
*Embedded Audio Meter
*Focus Assist (Red, Green, Blue, White four color optional highlight over parts of the image in focus)
*False Colors
*Zebra Exposure
*Check Field (Gray/ Red/ Green/ Blue)
*Internal Colorbar
*Camera Mode
*Scan Mode (Auto, Over Scan, Full Screen)
*Pixel to Pixel
*Real time video zoom-in (Standard, 4x, 9x,16x)
*Anamorphic Mode (1.3x, 2.0x, 2.0x mag)
*Image Flip (Horizontal, Vertical, Hor&Ver)
*Image Freeze
*Nine Grid
*Center Marker
*Safe Area (80%, 85%, 90%, 93%, 96%)
*Marker Type (16:9, 4:3, 2.35:1, 1.85:1)
*Marker Color (Red, Green, Blue, White, Gray, Black)

*Color Temperature Adjustment
Video Analysis Assistant Pattern
Waveform / Vector scope / Histogram
Waveform
This essential feature assists with the calibration of professional video cameras. It shows the overall brightness of the image assisting the video professional in correcting exposure. The waveform feature also checks the evenness of the lighting when lighting a chromakey or background.
Vectorscope
Vector scope shows how saturated the image is and where the pixels in the image land on the color spectrum. It can also be displayed in various sizes & positions, that allows users to monitor color gamut range in real time.
Color Histogram
Color histogram is a graphical display of the distribution of tones, shows the Red, Green and Blue channels in overlay histogram. Suitable for HD-SDI and HDMI signal monitoring.
  • All Scopes Mode
    This mode shrinks your video image to approximately the size of a 7" display and tiles your choice of vectorscope,histogram, and waveform on the border of your video.
Brightness Histogram
The Brightness Histogram is a quantitative tool to check the picture brightness. The feature shows the distribution of brightness in an image as graph of brightness along the horizontal axis (Left:Dark, Right:Bright)and a stack of the number of pixels at each level of brightness along the vertical axis.
  • Embedded Audio Monitoring
    The Audio Level Meters provide numerical indicators and headroom levels. It can generate accurate audio level displays to prevent errors during monitoring. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB.
Peaking Focus Assist
The Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. You can switch the putline color between red, green, blue and white according to different tone of the subject.Peaking focus assist of Z7 has High-low level to adjust, and also available during video zoom-in.
False Color
The False Color filter is used to aid in the setting of camera exposure. As the camera Iris is adjusted, elements of the image will change color based on the luminance or brightness values. This enables proper exposure to be achieved without the use of costly, complicated external test equipment.
Exposure (zebras)
The Exposure is used to assist in exposure adjustment in the mode of Zebra Pattern, it is considered overexposed and displays the moving warning lines onto the over exposed areas.
Check Field
Check Field is an assistant function to adjust camera color settings. Under the check field mode, you can use red, green, blue or mono pixels to generate the image, because hue and saturation can be adjusted more quickly and accurately in this environment.
  • Internal Colorbar
    Analyze monitor image color, adjust tone & brightness, etc.
Camera Mode Function
It will be full screen under camera mode.
Scan Mode
Auto, Overscan, Full screen
Pixel to Pixel
Enable the filmmaker to check the image from the 1:1 signal source without scaling.This feature is essential for capturing optimum detail.
Zoom In (4X, 9X, 16X)
Image magnification is HD signal in any part, an amplification for high quality close-up.
Anamorphic Mode
Built-in selection of no squeeze, 1.3× or 2.0× allows you to use anamorphic lenses or adapters and see the image unsqueezed, even if your camera does not de-squeeze in camera. A 2.0× mag mode, magnifies the center of your image so you can check the focus of your scaled image.
Image Flip
The Horizontal,Vertical and Hor&Ver of the image around flip.
Nine Grid
Zoom one of the images to realize the full screen. You can switch the Mark color between Red, Green, Blue, White, Black, Cyan, Purple, Yellow according to different tone of the subject.
Center Marker & Safe Marker
Safe Mark for View Finding and Composition (80%, 85%, 90%, 93%, 96%). You can switch the Mark color between Red, Green, Blue, White and Black according to different tone of the subject.
Marker Types
It has 6 colors for option (Red, Green, Blue, White, Black, Gray).

 

Display Spec.
 Model  Z7
 Size  7" IPS
 Resolution  1280×800 pixels
 Pixe Pitch  0.117 (H)×0.117 (V) mm
 Aspect Ratio  16:10
 Brightness  400cd/m²
 Contrast Ratio  800:1
 Backlight  LED
 Viewing Angle  89°/89°(L/R) 89°/89°(U/D)
 
Input
 1 X BNC  3G-SDI
 1 X HDMI  HDMI
 1 X BNC  Video
 2 X RCA  Audio(L/R)
 1 X DB-9  Tally
 
Output
 1 X BNC  3G-SDI
 1 X HDMI  HDMI
 1 X Conversion  HDMI input converted to SDI output 
 1 X BNC  Video
 
Audio
 Audio Out  Stereo Headphone, Speaker
 
SDI Support Format
480i/576i
720p(60/59.94/50/30/29/25/24/23.98)
1080i(60/59.94/50)
1080p(60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF)
 
HDMI Support Format
480i/576i/480p/576p
1080i (60/59.94/50)
720p (60/59.94/50/30/29/25/24/23.98)
1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF)
 
General
 Input Voltage  DC7~24V
 Power Consumption  ≤12W
 Power Connector  DC/ 4-pin XLR
 Battery Plate  F970 (Standard); D28S, LP-E6, V-Mount, Anton Bauer (Optional)
 Working Temperature  -20°C~55°C
 Storage Temperature  -30°C~65°C
 Install Way  1/4"-20 Thread Socket (3 sides left&right&bottom)
 Unit Size  182L×146H×27D mm
 Unit Weight  720g/740g (With F970 Plate)
 
Advanced Features
* Waveform (RGB,YUV,Y (Luminance))
* Vector Scope
* Color Histogram
* Histogram
* Embedded Audio
* Peaking Focus Assist ( has High-Low level to adjust; Red, Green, Blue, White four color optional highlight over parts of the image in focus)
* False Colors 
* Zebra Exposure 
* Check Field (Red,Green,Blue,Mono)
* Internal Colorbar
* Camera Mode
* Scan Mode (Auto,Over Scan, Full Screen)
* Zoom (Auto,4x,9x,16x)
* Anamorphic Mode (1.3x,2.0x,2.0x mag)
* Image Flip (H, V, H/V)
* Image Freeze
* Nine Grid (Zoom one of the images to realize the full screen)
* Pixel-to-Pixel 
* Center Marker
* Screen Marker (80%, 85%, 90%, 93%, 96%)
* Marker Types (16:9, 4:3, 2.35:1, 1.85:1)
* Color Temperature Adjustment
* Built-in LED tally indicators (Red, Green, Yellow)

 

Dimensions (Unit: mm)

Standard Accessories:
1× Mini HDMI Cable
1× Sunshade
1× Hot Shoe Mount
F970 Battey Plate
1× Tally Kit
1× 7 inch U bracket
1× Operation Manual